Jump to content

Vinyl fluoride

(Redirected from Fluoroethylene)
Vinyl fluoride
Names
Preferred IUPAC name
Fluoroethene
Other names
Vinylfluoride, Fluoroethylene, Monofluoroethylene, Vinyl fluoride monomer, VF, R 1141, UN 1860 (inhibited)
Identifiers
3D model (JSmol)
1731574
ChEBI
ChemSpider
ECHA InfoCard 100.000.757
EC Number
  • 200-832-6
130238
KEGG
RTECS number
  • YZ7351000
UNII
  • InChI=1S/C2H3F/c1-2-3/h2H,1H2 checkY
    Key: XUCNUKMRBVNAPB-UHFFFAOYSA-N checkY
  • InChI=1/C2H3F/c1-2-3/h2H,1H2
  • FC=C
Properties
C2H3F
Molar mass 46.04 g/mol
Appearance Colorless gas
Odor faint, ethereal[1]
Density 0.636 g/cm3
Melting point −160.5 °C (−256.9 °F; 112.6 K)
Boiling point −72.2 °C (−98.0 °F; 201.0 K)
Slightly soluble
Vapor pressure 25.2 atm (370.4 psi)
Hazards
GHS labelling:
GHS02: FlammableGHS08: Health hazard
Danger
H220, H341, H350, H373
P201, P202, P210, P260, P281, P308+P313, P314, P377, P381, P403, P405, P410+P403, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g. propaneInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
1
4
2
385 °C (725 °F; 658 K)
Explosive limits 2.6 - 21.7%
NIOSH (US health exposure limits):
PEL (Permissible)
 none[1]
REL (Recommended)
 TWA 1 ppm C 5 ppm[1]
IDLH (Immediate danger)
 N.D.[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Vinyl fluoride is an organic halide with the chemical formula C2H3F. It is a colorless gas with a faint ether-like odor. It is used as the monomeric precursor to the fluoropolymer polyvinylfluoride.

Production

It was first prepared in 1901 by Frédéric Swarts, the Belgian chemist who was the first to prepare chlorofluorocarbons in 1892. Swarts used the reaction of zinc with 1,1-difluoro-2-bromoethane. It is produced industrially by two routes, one being the mercury-catalyzed reaction of acetylene and hydrogen fluoride:[2]

HC≡CH + HF → CH2=CHF

It is also prepared from 1,1-chlorofluoroethane:

CH3CHClF → CH2=CHF + HCl

Safety

Vinyl fluoride is classified as an IARC Group 2A carcinogen (likely to cause cancer in humans).

Additional data

Its critical point is at 54.8 °C (328 K) and 5.24 MPa. Its molecular dipole moment is 1.4 Debye and heat of vaporization is 361 kJ/kg.

See also

References

  1. ^ a b c d NIOSH Pocket Guide to Chemical Hazards. "#0660". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ Günter Siegemund, Werner Schwertfeger, Andrew Feiring, Bruce Smart, Fred Behr, Herward Vogel, Blaine McKusick “Fluorine Compounds, Organic” Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2002. doi:10.1002/14356007.a11_349
Retrieved from "https://en.Wik.ipedia.Pro.org/w/index.php?title=Vinyl_fluoride&oldid=1254182196"

See what we do next...

OR

By submitting your email or phone number, you're giving mschf permission to send you email and/or recurring marketing texts. Data rates may apply. Text stop to cancel, help for help.

Success: You're subscribed now !