Jump to content

SkyCube

SkyCube
SkyCube in undeployed state
Mission typeEarth imaging
OperatorSouthern Stars
COSPAR ID1998-067EN
SATCAT no.39569
Mission duration60–90 days (planned)
Spacecraft properties
Spacecraft type1U CubeSat
ManufacturerNanoracks
Launch mass1.3 kg (2.9 lb)
Start of mission
Launch date9 January 2014, 18:07:05 UTC
RocketAntares 120
Launch siteMARS, LP-0A
ContractorOrbital Sciences
Deployed fromInternational Space Station
Deployment date28 February 2014
End of mission
Last contact27 March 2014
Decay date9 November 2014
Orbital parameters
Reference systemGeocentric orbit[1]
RegimeLow Earth orbit
Perigee altitude408 km (254 mi)
Apogee altitude414 km (257 mi)
Inclination51.65°
Period92.79 minutes

SkyCube was an American crowdsourced CubeSat. It was first announced on Kickstarter on 14 July 2012 and successfully funded on 12 September 2012, meeting its US$82,500 goal with a total of US$116,890. It was developed and built in 2012–2013, completed flight integration at Nanoracks in late 2013,[2] and launched aboard the Cygnus CRS Orb-1 flight[3] at the Mid-Atlantic Regional Spaceport on Wallops Island, Virginia on 9 January 2014. SkyCube was deployed from the International Space Station on 28 February 2014. Contact with the satellite was last made on 27 March 2014. SkyCube re-entered the Earth's atmosphere on 9 November 2014.[4] It is one of several crowdfunded satellites launched during the 2010s.[5]

Mission

SkyCube had three major mission components: the broadcast of messages from its radio, the capture of pictures from space via its three cameras, and the deployment of a large balloon.

Messages

The SkyCube radio emitted periodic beaconing pings which contained 120-byte messages from the Kickstarter backers. These pings were transmitted at 915 MHz, using the AX.25 protocol at 9600 baud with BPSK modulation, with a callsign of WG9XMF.[6]

Imaging

Using its three cameras, SkyCube intended to take pictures of the Earth from orbit. The cameras were VGA resolution and had lenses with three different fields of view (120°, 35°, and 6°), giving a variety of imaging possibilities. The images would have been transmitted back to Earth at 57.6 kbit/s. Kickstarter backers chose when the pictures were taken. National Oceanic and Atmospheric Administration (NOAA) granted a 90-day imaging license to SkyCube on 1 February 2013.[7]

Balloon

SkyCube would have deployed a large (2 m (6 ft 7 in)) balloon at the end of its mission. The balloon was coated with reflective titanium dioxide and made it visible from the ground. The balloon increased the atmospheric drag on SkyCube, and within two weeks the orbit would have decayed enough for SkyCube to enter Earth's atmosphere and burn up safely. The inflation was intended to be triggered via 4-gram CO2 canister.

Mission Failure

Several attempts were made to establish connection with the satellite, following its deployment. Initial attempts failed, but eventually basic telemetry was received, which indicated that at least one solar panel failed to deploy.[8] However, subsequent communication attempts were made to send commands to the satellite, but none created a response. The fact that the satellite's orbit did not decay as quickly as those other CubeSats launched indicates that it experienced less drag, which also supports the conclusion that there was not a sufficient solar panel deployment.[9]

Technical specifications

Dimensions 10 × 10 × 11.3 cm CubeSat standard
Interface specification ISIPOD 1.4I
Mass 1.3 kg (2.9 lb)
Expected lifetime 60 – 90 days
Attitude control system Passive magnotorquers
Power 9 total panels: one roof panel and 8 deployable panels. Each panel consists of 24 Spectrolab triangular cells wired in series-parallel for a nominal 12 V.
Batteries 2 x Li-ion 18650 cells, 8.4 V 2300 mAh, Molicell ICR18650J.
Power bus 3.3 V, 5 V regulated. Constant-current driver for solar panel deployment (Nichrome burn wires).
Primary downlink 915 MHz, AX.25 protocol, BPSK modulation, 57.6 kbit/s
Telemetry/messaging downlink 915 MHz, AX.25 protocol, BPSK modulation, 9.6 kbit/s
Command uplink 450 MHz, AX.25 protocol, FSK modulation, 9.6 kbit/s

Partnerships

SkyCube relied on several partners to provide necessary services:

Organization Function
Naval Postgraduate School Ground station services in North America and Hawaii[10]
Saber Astronautics Ground station and Mission Control services in Australia[11]
Orbital Sciences Launch provider
Nanoracks Integrator[2]
Astronautical Development, LLC Radios and structural components

Further reading

See also

References

  1. ^ McDowell, Jonathan. "Satellite Catalog". Jonathan's Space Report. Retrieved 3 May 2018.
  2. ^ a b "Nanoracks Completes Flight Integration of CubeSats Bound on Orb1 to the ISS". 15 November 2013.
  3. ^ "New Science Bound for Station on Orbital's Cygnus". 4 April 2015. Archived from the original on 6 February 2014. Retrieved 2 February 2014.
  4. ^ "About Southern Stars". Retrieved 10 December 2022.
  5. ^ Reyes, Matthew (7 April 2014). "DIY Satellites: Now and Near Future | Make". makezine.com. Retrieved 5 January 2019.
  6. ^ "FCC Experimental License for SkyCube". FCC. Public Domain This article incorporates text from this source, which is in the public domain.
  7. ^ "SkyCube Private Remote Sensing License: Public Summary" (PDF). NOAA. Archived from the original (PDF) on 22 February 2014. Retrieved 3 February 2014. Public Domain This article incorporates text from this source, which is in the public domain.
  8. ^ "Update 35: We Have Identified SkyCube · SkyCube: The First Satellite Launched by You!". Retrieved 2 April 2022.
  9. ^ "Update 37: Looking Back, Looking Forward · SkyCube: The First Satellite Launched by You!". Retrieved 2 April 2022.
  10. ^ "Mobile CubeSat Command and Control (MC3) Ground Stations" (PDF). Archived from the original (PDF) on 4 March 2014. Retrieved 9 February 2014.
  11. ^ "29 October 2013: Space Operations Deal Signed with Southern Stars". Archived from the original on 22 February 2014.
  12. ^ "SJ startup to launch crowdfunded satellite into space".

See what we do next...

OR

By submitting your email or phone number, you're giving mschf permission to send you email and/or recurring marketing texts. Data rates may apply. Text stop to cancel, help for help.

Success: You're subscribed now !